Hornby - BR - B12 Class - 4-6-0 - 61556

R3545

SKU: HBY3545

$269.00
Share:

Hornby

BR, B12 Class, 4-6-0, 61556
Era 4
 
The restrictions on locomotive weight and length were keenly felt by the Great Eastern Railway and whilst James Holden’s S46, D56 and H88 Claud Hamilton 4-4-0 designs were not unduly restricted, when he came to consider a 4-6-0 design for high performance express work, the inside cylinder was his only real option. To gain power, Holden was quick to embrace the idea of superheating and so in 1911, the first order was placed for his S69 class locomotive.
 
Under the GER, seventy one S69 engines were built, fifty one at Stratford and twenty at Wm Beardmore & Co. in Glasgow. The large enclosed cab with side windows and an extended roof were a noticeable feature of Holden’s design which, allied to the large Belpaire firebox, decorative valance over the driving wheels and short 3,700 gallon tender, gave the impression of the locomotive being bigger than it actually was.
 
Allocated throughout East Anglian sheds, the S69 saw sterling service hauling the Liverpool Street-Norwich mainline trains, as well as the Harwich Boat Trains, Cambridge and Great Yarmouth services. At Grouping in 1923, the S69 became classified as the LNER B12 and extended its range to Doncaster, Leeds and Manchester. The LNER’s plans for 2-6-4T engines to operate services to Southend were abandoned following issues with the type’s stability and so a further ten B12 locomotives were ordered from Beyer, Peacock and Co to fill the void, the design being fitted with vacuum ejectors, Lenz poppet valves and dual air and vacuum brakes and classified as class B12/2.
 
With large scale upgrading to the permanent way by the LNER, it at last became possible to increase the weight of locomotives and so a larger, round topped boiler pattern, with a bigger superheater was introduced, along with modified valve gear, resulting in a new B12/3 classification. Further modifications were carried out to the boilers of nine of the twenty five Scottish engines, this resulted in the final variation of the class, the B12/4.
 
During 1944, due to their wide route availability, a number of the B12/3s were utilised to work on ambulance trains hauling air braked, American built stock, mainly in the West Country. To improve the loading gauge, the footsteps were cut back and holes cut into them, making them instantly recognisable in later years.
 
Seventy two locomotives entered British Rail service at Nationalisation in 1948, further withdrawals taking place at regular intervals until the last locomotive, No.61572, was withdrawn in September 1961 and it is this engine that is preserved at the North Norfolk Railway.
 
Locomotive 61556 was built at Wm. Beardmore’s Glasgow Works and entered traffic at Stratford during February 1921, remaining there until December 15, 1927 when it was moved to Ipswich. For the rest of its working life, the locomotive moved between Colchester, Norwich and Stratford, receiving the ACFI feed in late 1931 whilst at Stratford, before being rebuilt as a B12/3 in May 1935. 61556 was withdrawn from service whilst allocated to Norwich, in December 1957.
 
Maximum curve Hornby 2nd radius + / 438mm+
 
Specs:
  • Gauge: 00
  • Length: 235mm
  • DCC Type: DCC Ready
  • Operator/Livery: BR
  • Class: B12
  • Designer: S. D. Holden
  • Entered Service: 1930s
  • Age Suitability: 14+
  • Motor: 5 Pole Skew Wound. Loco Drive
  • Wheel Configuration: 4-6-0
SKU HBY3545
Barcode # 5055286669750
Brand Hornby


Flat Rate Shipping - $0.00

Be The First To Review This Product!

Help other Hobby One users shop smarter by writing reviews for products you have purchased.

Write a product review