Milliput - 2 Part Epoxy Filler Silver-Grey

SKU: MILG

$17.99

In Stock

Product Details
Reviews

Description

Milliput
Epoxy Putty
Silver-Grey

Milliput is a two-part, cold setting, non shrinking epoxy putty sold in cartons containing 113.4gm (One 56.7gm stick of each part)

Milliput can be used for repairs on many types of materials including metals, plastics, masonry, wood, glass and ceramics and can be used in places where welding is impractical.

Why Milliput? Because it is the most versatile material available:

Self hardening
Non shrinking
Tough and durable
Sets underwater
Electrically insulating
Water, heat and chemical resistant
Highly adhesive to most materials
Moulds like putty - sets like rock

Keep a pack of Milliput in your tool box for those urgent emergency repairs.

Tips & Tricks:

Milliput will have a storage life of approximately 2 years providing it is stored in cool, dry conditions. Place unused epoxy putty in polythene bags and re-seal. Storage at high temperatures or high humidity may reduce shelf life.

We know customers have softened Milliput by placing it in a microwave on defrost for a few seconds (although this is a practice we could not endorse).

There are a number of ways of colouring Milliput.

Different colours can be obtain by cross-mixing or blending from the range of colours that Milliput is available in.

Powder pigment can be mixed in, in small quantities, so that the mixture does not become too dry and crumbly. Strong powder pigment rather than powder paint is better as smaller amounts can be used.

Liquid colourings, like enamel paints, oil paints, spirit based-dyes or pigments can also be used to colour Milliput, but liquids or pastes may be difficult to introduce into the putty, again small quantities should be used, to avoid creating a very wet mix that may be difficult to mix.

In all cases the Milliput should be thoroughly mixed by rolling & folding about 30-35 times. This will ensure that all the hardener has come in good contact with the resin and the Milliput will then set correctly.

If you are interrupted while you are mixing Milliput, you can put the Milliput into a deep freezer until you can get back to work. This will keep the product at approximately the same state of setting at which it was frozen for up to 36 hours. Simply remove the now frozen product from the freezer and warm in the hand and it is ready to use. If stored immediately on mixing it retains its sticky nature.